产品详情
简单介绍：
插头线滚桶跌落试验机测试插头线在经过一定次数自由跌落后的**与可靠度。试法是把插头含后端电源线 100mm 处剪断，作为试件，投入滚桶内，依试件重量设定标准所要求之跌落次数，使试件连续落下撞击，到达设定次数后，本机自动停机，然后取出试件检查受损程度。
详情介绍：
IEC884-1、GB2099.1、VDE0620、BS1363
插头线滚桶跌落试验机测试插头线在经过一定次数自由跌落后的**与可靠度。试法是把插头含后端电源线 100mm 处剪断，作为试件，投入滚桶内，依试件重量设定标准所要求之跌落次数，使试件连续落下撞击，到达设定次数后，本机自动停机，然后取出试件检查受损程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel，then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
插头线滚桶跌落试验机测试插头线在经过一定次数自由跌落后的**与可靠度。试法是把插头含后端电源线 100mm 处剪断，作为试件，投入滚桶内，依试件重量设定标准所要求之跌落次数，使试件连续落下撞击，到达设定次数后，本机自动停机，然后取出试件检查受损程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel，then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
|
滚动速度 Tumbling speed |
5r.p.m ( 即每分钟跌落 10 次 ) |
|
计数器 Counter |
电子式，6 位数，到达设定次数自动停机 Electronic type 6 digits，auto-stop during the preset numbers are reached |
|
电源 Power |
AC220V / 50Hz |